ACEss
Nov 24th, 98, 04:39 AM
CAN IT FIT WITHOUT TOUCHING THE STOCK FIREWALL?? THANKS http://www.camaros.net/forum/biggrin.gif
|
View Full Version : HEI IGNITION ON MY Z ACEss Nov 24th, 98, 04:39 AM CAN IT FIT WITHOUT TOUCHING THE STOCK FIREWALL?? THANKS http://www.camaros.net/forum/biggrin.gif Dave Birdwell Nov 24th, 98, 09:40 AM It does fit, but if you have a cowl induction air cleaner, it will need to be dented with a ball peen hammer to clear the cap. Also you will need to run a heavier gauge wire to run the HEI. The existing coil wire will not have enough voltage to run the HEI properly. Racing Nov 24th, 98, 09:57 AM Good call Dave.If ya wanna use a HEI,iŽd suggest that u replace the coil wire(+) at the junction on the firewall with a non resistance one. ------------------ DVC-98.Racing 482 cubes of fogger injected thunder in a 71 z. racing@mbox303.swipnet.se (http://racing@mbox303.swipnet.se) ACEss Nov 25th, 98, 05:54 AM Thanks guys, I will put a hei on my Z http://www.camaros.net/forum/smile.gif http://www.camaros.net/forum/biggrin.gif mrchicano Feb 21st, 99, 09:31 PM davie i have an 1987 camaro i just put a new moter in it and i cant get the starter to kick i noticed a box next to the battery with 4 or 5 wires coming from it do those wires hook up to the wire conecter on the side of the fule injection air intake ? |