I just bought a 73 camaro rs and the car was completely torn apart. well I have to get the car running by the end of next week and nothing is stock. My question is, the car has no charcoal cannister, just a line coming from the rear (on the driver side). where do i hook up this line? line says evap on it. can I just leave this line disconnected and not worry about it or will fuel spill out? Thank you in advance for your replies.

[ 08-22-2004, 03:50 PM: Message edited by: 73 2ndgen ]

ttt

The drvr side line is from the gas tank and was/is a vent line for the tank to the charcoal cannister.

I would put a plug/cap over the end of it to prevent anything from going in and vapors from coming out. Then get a vented gas cap, this line also allowed the air to replace the fuel dispensed from the tank as it was used/pumped.