|
RickD Jul 14th, 01, 10:20 AM What is the appropriate method of cleaning a bronze fuel filter? I'm assuming, as with K&N's, you don't want to submerge the element and contaminate the inside surface. ------------------ Rick Dorion 69 RS Conv,355,M20,4.10's davidpozzi Jul 14th, 01, 11:39 AM Rick, I've cleaned them with carb cleaner, you can soak them in it, then blow out with compressed air. They can plug up with very fine dust particles and look like they are fine. Try blowing through it to prove there is no restriction. I dont' like to use the bronze filters, I prefer a screen or paper element. David ------------------ Check my web page for First Gen Camaro suspension info: David's Motorsports page (http://ourworld.compuserve.com/homepages/David_Pozzi/) First Gen Suspension Page (http://ourworld.compuserve.com/homepages/David_Pozzi/first_gen_suspension.htm) 67 RS 327 69 Camaro Vintage Racer 65 Lola T-70 Chev 350 Can-Am Vintage Racer [This message has been edited by davidpozzi (edited 07-14-2001).] | ||