i had the wiring out of the wiper assembly for a while now. im just about to plug in the terminals. my question would be, where do the terminals go? i got he two yellow leads to the top of the wiuper assembly along with the single black wire connector. there is a yellow and blue wire that goes to the wiper motor but which way does it plug in? does anyone have a pic they can email me?

thanks,
angel

ps. i tried looking in the assemby manual but it doesnt help me.

thanks again

I don't have a pic, but, one side of the connector has a slot in it and the terminal on the motor have a tang that will align with the slot when pushed on in the right position...

like firing order said, the plugs should only go in one way. but on my 68, the plug w/ two yellows attaches at the top, a light blue to next one down, and last is the black. the 2nd yellow wire off the first term on the motor plugs into the pump,(top spade) along with a dark blue (2nd spade down). hope that helps

68,

that does help. but on a 69 rs, there are two more terms(red and black) that lead to another solinoid. they are connected to the yellow and blue wires. ive looked at all my reference books but i can not distinguish the colors and there are no clear pics of the last set of wires.

thanks,
angel

hmm, those last two wires (red/black) must be for the headlight washer soenoid. is yours still there? sorry i cant help you further, somebody else here must have a good idea though. good luck.

68,

yeah. i still have it attached. everything is original except for things like hoses and belts.
now trying to get the wiring correct so i dont fry this electrical.

thanks,
angel