can anyone scan in the tach and console wiring diagrams? i replaced my tach. and added a (gauge cluster) harness and the tach doesn't work and the fuel gauge doesn't either, the fuel light on the dash stays illuminated, probably because i do not have the low fuel sending unit and don't know where it goes. i ordered a wiring diagram from d&r after they told me that the gauges and tach were shown, but they were wrong? i also have a small pink wire that is near the tach connector breakout that is cut off but no way to tell where it went only one end showing. i think this may be my 12v supply to the tach but the one on the tach is there. there is also a cut off yellow wire about 6" down the main harness from the tach and no clue where it went either. anyone know? thanks

<BLOCKQUOTE>quote:</font><HR>Originally posted by james69z28:
can anyone scan in the tach and console wiring diagrams? i replaced my tach. and added a (gauge cluster) harness and the tach doesn't work and the fuel gauge doesn't either, the fuel light on the dash stays illuminated, probably because i do not have the low fuel sending unit and don't know where it goes. i ordered a wiring diagram from d&r after they told me that the gauges and tach were shown, but they were wrong? i also have a small pink wire that is near the tach connector breakout that is cut off but no way to tell where it went only one end showing. i think this may be my 12v supply to the tach but the one on the tach is there. there is also a cut off yellow wire about 6" down the main harness from the tach and no clue where it went either. anyone know? thanks<HR></BLOCKQUOTE>

Try the following website for some good info on wiring diagrams. They cover just about all of them, including Camaro's.
http://diagramman1.tripod.com/wiringdiagramschevyfordpontiacoldsmobiledodgeandma nymore/index.html

thanks zeeman, it looks like what i want, but i have bought 1 set from d&r camaro and it doesn't have the tach. or gauge diagram. i found out that the brown wire from the coil is open somewhere. it looks perfect from the tach to the fuse block under the hood. i took the tach and used jumpers and it worked fine, i checked tha black to ground and the pink to switched 12v and both were good, so it appears that the coil signal is not getting to the brown wire on the tach plug under the dash. and without a diagram it is impossible to trace. thanks for the info i may call them and order.