I currently own a 1993 Camaro and am experiencing problems with the power windows. The switchs work fine. Is there a fuse or something that I should be doing to allow them to work? Or do I need to bring it into the dealer? As of this moment neither power window goes up or down. Please advise


[This message has been edited by Brian Purdy (edited 02-06-2001).]

?? if the windows dont work, then how do you know the switch is fine???

but yes theres a fuse, and a relay in the black plastic relay box under the hood, check the fuse first. then if no , replace relay. or trace wire to look for short circut

------------------
Chris's 67 RS can be seen at http://www.67rs.com
JOIN THE CAMARO NET WEBRING! http://nav.webring.yahoo.com/hub?ring=camaronet&list

[This message has been edited by Chris Edwards (edited 02-07-2001).]

There should be a 30 amp window circuit breaker. it could be this.I've had a similar problem on my truck where the ground wire broke in the harness as it went to the door. From all the movement.


TTFN
Mat

check the fuse, check for a broken wire in the door jamb. another common problem on newer chevys is that the contacts inside the switch get dirty. remove , carefully take apart, and clean switches from BOTH doors. I have had this problem on alot of chevys, usually it is the drivers side switch that is dirty.

Usually the drivers switch is the culpret.Pull out the switch,check for power,with key on(it's usually the orange wire)if you have power,more than likeley it's the switch.

------------------
68 z28 ,68 rs 327 ,73 454 vette, 2 goofy kids