I have all origional wiring except from HEI
how do I properly connect wiring. 2 sets of wires black,brown and pink from distibutor
to cap labeled C- GRND B+ other set from cap
pink and white labeled A-B or tach and BATT on cap, pink is larger quage wire than white.
I have read I need to run wire to fuse box is there an extra spot for power? how would I run it to fuse box.

all you need to do is run a new #10 or #12 wire to fuse box hook it to a fuse that is turned on and off by the ignition switch and plug it into the spade lug that is beside fuse on hei you then hook other end to the bat terminal