Working on the wiring on my 67, went to replace the positive battery cable and found out that the juntion block was missing and the previous owner had jury rigged the connection. (not very well either!) Does anyone have a picture they can post of an installed junction block on a 67. The assembly manual I have doesn't show it very well.

Thanks for the help.

Victor

I don't have a picture, but I think I can describe it. Behind the battery on the radiator support there is a small square depression that the junction block sets in. It has a single screw that holds it in place. Look for about a 1" square depression with a small screw hole on one side.

Here ya go, mine does not have the lead from the battery hooked up so there would be one more wire. http://thehoovers.com/liam/camaro/positive_junction.jpg

Thanks for the help!

I thought that is where it went, but I dont have the part yet (get it tomorrow)

Victor