Hello 1st time user, I'm repairing my back 1/4 window rollers. I'm having a terrible time trying to get the nut off. It looks like a thick flat washer with one hole on both sides of it. I cannot locate a proper tool for it. I have contacted a couple of local parts shops and they have no idea what it is called. Any help would be very appreciated! Thanks, jcclopez

You can try to get a vice grip on the nut. If that doesn't work, take it to an auto glass shop and let them remove it.

I took mine off by wetting the rubber gasket and using a pair of needle nose pliers to remove the retainer.

------------------
69 SS, 350, 4 Speed
75 400, 4 Speed
93 Z28, 6 Speed

The parts houses sell a window nut removal tool for under $15. I bought one from Rick's and it worked fine. You still have to WD-40 them though.

Kevin

------------------
69' SS-350 Convert, M20, 3.55 posi. Totally Disassembled & in boxes (I'm working on it!) (http://www.fototime.com/0A0DC8E11C07E95/standard.jpg)
69'(Hugger Orange -originally, Burgundy now) Z-21 Convert 327/PG, Driver (http://www.fototime.com/BD198A2E7BF669A/standard.jpg)

[This message has been edited by KevinW (edited 01-18-2002).]

I used a spanner wrench that came with my grinder. I just had to tap the pins a little closer together.