|
: What do I need to mount console? Racer#00 May 18th, 01, 01:29 PM I bought a used 67 console for my 67 plain jane about 2 years ago. I'm getting close to putting the car back together and since it did not have a console originally, I was wondering what do I need to mount it? I just bought the console itself with no mounting hardware. ------------------ Racer#00 Plain Jane 67 76 Trans Am Stock Car 74 Z28 (Basket case) backfire May 18th, 01, 06:52 PM As I recall, there is a u shaped bracket that attaches to the hump. This bracket has points on each side that line up with the screw holes in sides of the console. Other than that, I think the other attachment points are in the bottom of the console to the floor. Someone correct me if I'm wrong. You can get the bracket from a Camaro parts house if unable to get elsewhere. LH [This message has been edited by backfire (edited 05-18-2001).] RobR May 19th, 01, 09:24 PM Here is a pic of my interior (or lack of) showing the U bracket that bolts to the trans tunnel. http://members.nbci.com/robr54/project/insid399.jpg The back of the console is screwed down by opening the console lid. ------------------ Rob Rice robr54@hotmail.com http://members.xoom.com/robr54 [This message has been edited by RobR (edited 05-19-2001).] Racer#00 May 21st, 01, 04:58 AM Thanks guys! ------------------ Racer#00 Plain Jane 67 76 Trans Am Stock Car 74 Z28 (Basket case) | ||