ive heard that u can integrate the front seats from the newer camaros (90's models) into the 3rd gen camaros.

i know the seats can be found easily in a junker, as well as the stock brackets and everything, but exactly wat would be needed to install them successfully? is it too hard to do?

It's my understanding a 4th gen seat will bolt into a 3rd gen but I don't have any first hand experience with it. You might check out some of the 3rd gen camaro sites as the guys here are always willing to help but the expertise is mostly 1st generation...

This topic is covered, including everything you need on installation at

www.thirdgen.org (http://www.thirdgen.org)

I even believe at one time there was a tech article on it. Hope this helps.