Anyone have any tricks on installing the center dash panel on a '67 Coupe. When I screw it in on the bottom, the top is loose and rattles when I drive. Am I missing something ?

Thanks

yes, there is a plastic piece called a "center dash retainer" that you need. it's cheap and you can get them from any camaro parts supplier. you'll have to screw it onto the dash and then slip the top part of the dash panel over it before you screw the bottom down.

The top Retainer might be loose, broken, backwards, or upside down....

------------------
Geezer

[This message has been edited by Geezer (edited 05-07-2001).]

Thanks guys - I just ordered the retainer and screws and will give it a try (The retainer was missing)