I'm considering doing some work on the car that requires the use of the shoulder belt anchor point. However, with the headliner in place and stretched tight I cannot use the Braile method to find the holes.

If anybody out there has their headliner out can you please take a few measurement to the small hole that is between the two threaded holes in the anchor point?

Thanks in advance.

Carl

------------------
The Red Beast http://www.geocities.com/casanoc

What year are you working on?

<BLOCKQUOTE>quote:</font><HR>Originally posted by Mr. C:
What year are you working on?<HR></BLOCKQUOTE>

Whoops! It's a 1968 coupe.

------------------
The Red Beast http://www.geocities.com/casanoc

I just measured Mine from the center of the sun visor screws (imagine the center of the triangle made by the three screws) to the small hole between the two threaded holes as you described: 39 1/4 inches. Also these holes are about a 1/4 inch below the coat hook screw (guesstimate)....Hope this helps!...

That works. Thanks.

------------------
The Red Beast http://www.geocities.com/casanoc

Carl, let me know if you find them. I want to get shoulder belts also.

------------------
68 RS, Ash Gold,pwr brakes,pwr windows,Hounds tooth,355/T350,MSD 6AL,3200 stall Dynamic converter,3.31:1 posi,Autometer guage pod

67's have a different location than 68/69's