does anyone noone if they have seen any 1997 m3 seats in a 67 camaro. does anyone no if this would work

I installed them in my 68. PITA but anything is possible. Mine are full power seats. Had to cut one side of the track and move it in. The electric motors have a cable on each end. These had to be cut and welded. I would look for another seat if you can.

seats from a '95-'97 dodge stratus are full power seats and are pretty easy to adapt. drill & tap a steel plate in the rear for the dodge seat to bolt to, then drill another hole to bolt to the floor. on the front you'll neet to get two speed nuts for 3/8 bolts and drill a couple of holes on the vertical edge of the seat brace on the floor pan to bolt them up. only other thing is that seats are kinda wide, so they'll need to be trimmed down or have other seat cushions mounted to the framework.

hope this helps.