Steering wheel won't come off. Is there something I'm missing? I managed to bend 4 sets of bolts really bad and it won't come off. My puller just won't work. Tried the steering wheel puller and the harmonic balancer puller. Neither worked. The center bolt keeps sliding around and won't stay straight. Please help. Any tips?

------------------
Tony
<UL TYPE=SQUARE>
<LI>1979 Z-28, 350- Edelbrock Performer RPM Package- TH350
<LI>1970 Cadillac Hearse - 472 BB automatic 375hp
<LI>2000 Gmc Sonoma - 5-speed 4.10 rear
[/list]

Tony..Try putting the nut back on the steering shaft and back it off enough
so the center shaft of of the puller
sits in this little pocket.
Also,make sure the bolts are adjusted
evenly so the puller doesn't slip to one
side.Good luck!
Bob

Be very careful not to beat on the column or shaft. It is colapsible.
David

------------------
Check my web page for First Gen Camaro suspension info:
David's Motorsports page (http://ourworld.compuserve.com/homepages/David_Pozzi/)
First Gen Suspension Page (http://ourworld.compuserve.com/homepages/David_Pozzi/first_gen_suspension.htm)
67 RS 327
69 Camaro Vintage Racer
65 Lola T-70 Chev 350 Can-Am Vintage Racer