where i work we use 1/4 and 3/8 heavy wall aluminum tubing. we had some out of round tubing on a 25' roll so i am scraping this roll. i took the roll home and plan on using it for fuel line, but would like to know if it could also be used for the tranny lines as well?
any thoughts?
thanks,
bruce

The tranny lines are 5/16.

------------------
Black 69 camaro

Bruce,

Something more important is that fuel pressure's for carburated don't exceed 20 psi. trans pressure's can go way way past this. the aluminum line needs to exceed that psi for burst strength.

------------------
TONY
67 CAMARO R/S CLONE, 355/turbo 350, 200hp NOS,12 bolt,etc...

thanks for the help.
bruce