For those who have timing tape on their balancers, how did you fasten it? I'm thinking about using super glue for lack of any other ideas. Any suggestions? TIA - Jon

------------------
'69 Restification

Use that stick glue kids use nowadays in school. It should clean up a lot nicer than super glue.

[This message has been edited by Silver69 (edited 03-29-2002).]

Silver69 - appreciate your help. However, I don't think that stuff is strong enough. Maybe some type of epoxy?

You could always use a clear coat over it after gluing.

------------------
Don~ ZZ430DropTop (http://hometown.aol.com/zz430droptop67rs)
~~~~and~~~~
70 RS/Z28 (http://hometown.aol.com/performancespecs)
67 RS/SS Convertible, 70 RS/Z28

Every timing tape I've bought has its own adhesive - just peel the paper liner off the back and apply it to the balancer; clean the balancer surface very thoroughly first.

------------------
JohnZ
CRG
'69 Z28 Fathom Green

I'm in agreement with John. If the dampner is clean it will stick...

------------------
...Dennis
"The '69 (http://chevelles.com/showroom/fine69_03.jpg), the '96 (http://chevelles.com/showroom/fine69_02.jpg) & the club (http://camaroslimited.com/)"

ahhh...that shows what I know. I didn't realize the tape already had stickum' stuff on it. Thanks guys