Was the 12 bolt rearend available without the SS or Z28 package. Just wondering if the one in my RS came that way or was installed by someone other than the factory.

Yes it was. For more specific data you may want to consider posting your Vin number, cowl tag information and any protecto plate information that you may have, in the "Tag Team" aera.

Interestingly enough, I had just done that a few days ago and found that I actually have a 'rare', or so it looks, "L30/M20" 1967 RS. One of like 4,756 cars.......

Just because I questioned the 12 bolt in my chassis.

Good luck~

[This message has been edited by chicane67 (edited 01-25-2003).]

You can also check the build date of the rear end to see if it corresponses w/ the build date of the car. It will be located on the passenger side axle tube. Look under Index then your year then axle codes here on this site or here at www.camaros.org/cgi-bin/webbbs4.33/cuscrg/cuscrg.pl. (http://www.camaros.org/cgi-bin/webbbs4.33/cuscrg/cuscrg.pl.)

Also alot of LM1 350/255 69's like mine came with 12 bolts too. They were not 'only' for SS or Z's


------------------
.... Click aka Jim .. Cylinder Index = 35
Dover White 69RS 350/255 LM1, TH-350 auto., A/C
Blue Vinyl top, F&R spoilers, 3.08 Eaton Posi.
fold down rear seat, PDB, PS, Cowl Induction, Endura Bumper
My RS.. www.brainerd.net/~knudsen/69RS (http://www.brainerd.net/~knudsen/69RS)

I have an original 69 RS, L65 350/250 with a 12 bolt and 2:56 gears.

------------------
"All-muscle, all-car, without a tacky piece of gingerbread anywhere."