We've just swapped a PG for a TH350 tranny on our 68 327. (What a difference!) The trouble is I can't seem to find a bracket for the kickdown cable. We need to install it on a Holley 650 on top of a Edelbrock Performer manifold.

Any links to a parts supplier and instructions for mounting and adjusting the kickdown would be most welcome! Thanks in advance.

I've found a couple of sources for brackets. Here's a fancy stainless one for $17: http://www.palshotrodparts.com/store.asp?ItemID=166. But, I'm wondering if it will fit on the Edelbrock manifold?

That will fit.

If I recall correctly, Rick's has them. Not chromed.

Dealer has them also, $3 USD, in non-chromed, paint to your color.