i just installed a new clutch bellcrank the new bellcreank has a zerk grease fitting i assume i should put grease in it my question is on the engine side all that is there is the felt washer i cant see that keeping grease in and second the reasion im changing it is the hole for the pedal rod at the bellcrank is egged out and the new hole is to big for the new pedal rod shoudnt there be a bushing?

I just took mine apart after five years. I gobbed some wheel bearing grease on the ball studs five years ago, and never greased it since. Everything looks great and it's still nice and tight.

There is no bushing. If the hole was worn that bad, I'd guess the rod is too. New ones are avilable and cheap.