I need some info please.
I have been making and selling a Switch assy. for use on a Muncie and B/W 4sp. It makes the back up lights come on. The ? is on the tail housing. Will they interchange between a Muncie, B/W, and a Saginaw? I just need to know for mounting purposes. I dont care if they will work it graemlins/thumbsup.gif would just need to bolt up with the main housing. Also the reverse shaft for the shifter linkage is it in the same spot on all 3 tranys?
Thanks for the help. If anyone has pictures of the Sag or B/W that could send them to me that would be great.
I have come up with a better set up that may fit all these tranys.
If that happens I'll put it in the sell area.
Thanks again, Matt.

OK I found the info I needed. I never have seen a Sag so I didn't know what it looked like. And without having a B/W sitting here to try it on I can't say it will work.
But it does fitt the Muncie and works great.
I will just have to find those tranys and build for them also.
Matt.

That switch and mounting bracket was used on '63-'73 Corvettes, and has been available for T-10's and Muncies (same switch, harness pigtail, rod, clips and bracket for both) for many years - all the Corvette resto parts houses sell them.

http://img.villagephotos.com/p/2002-2/13522/BkUpFrtView700.jpg
graemlins/beers.gif