After restoration, factory air was not hooked up.Trying to find original location of receiver drier including mounts. Thanks for any help.

On the front of the inner fender behind the battery. Two screw hole dimples in the front of the wheelwell, one for each of the two mounting straps that go around the dryer. Dimples are probably 3" apart one above the other. 67/68's get mounted striaght up and down, 69's lean with the top leaning inwards towards the engine. The mounting straps ARE different for 67/68 than 69. Most of the repro houses list the straps for the 69 as being different, but 9 times out of 10 you get the same as the 67/68 straps, because who ever is making them welds the upper bracket together backwards.

Thanks! I'll pass the info on to my a/c man.

There is a picture of the drier mount in the Assembly Instruction Manual. I can take a picture of mine if you need it.