I need help identifing the rear cocktail shakers for a 69. My trunk has 2 mounting holes for the top and bottom. I'm seeing abunch of rear shakers that are supposedly for 69's that have only 1 upper mounting bracket.

Any one have good pics? Do they infact just have 1 upper bracket?
Do the rest of you have an extra upper hole in your 69 camaro?

Thanks

There are a few pictures here that may help graemlins/thumbsup.gif

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2436352592&category=6161

Here's one of mine... Not sure what the other hole is for... If you turn the shaker 180 degs it will line up with the 2 lower holes and the other upper hole and bolt in. Mounted that way it actually sits in the trunk area instead of under the fender and gets in the way.

http://www.camaros.net/pnwcc/DjD/spatter3.jpg

Nice pic Dennis!

There is one upper bracket, but as Dennis said the shakers can be mounted using either the frontmost hole (which is wrong) or the rearmost hole (which is right).

Here is a shot from above which shows the lower mounting positions(although my shakers don't look as nice as DjD's as I didn't spray them with spatter paint).


http://www.stratagaz.com/69LM1/LM1-DRearShaker.jpg

In the pic it almost looks like there are three bolts on the bottom, but that is only a reflection of one of the bolts because the POR15 is so shiney.

I have an extra set of rear 69 shakers up in the attic. If you need any additional pics, let me know.

Great that is exactly what I was looking for.

The firebirds rears must be different.

I saw a firebird that had 2 upper brackets, that's what triggered my question.

THANK YOU