Does anybody have any measurements of where to mount my winshield washer jar on a 68 rs? My car was a drag car and the inner wheelwells were missing when I bought the car. I have since installed new ones from Ricks and there is no dimples or markings on it. I know it goes on the drivers side wheelwell and I could get "close" but I really want it exactly. Kind of picky, aren't I.. Thanks and Happy Holidays to all!

Does this help any?
http://www.stevewaddington.com/camaro/images/100_3403.jpg

It mounts to the radiator support on the driver's side just to the left of the voltage regulator and horn relay.

I'm not that good with a '68, but, if it is an RS, would the washer bottle be mounted on the passenger side inner fender like a '69?

I’d have to check the assembly manual, I thought it went on the fender well on 67-8 as well. I haven’t finished my engine compartment and don’t remember where the jug was off hand.

You may be right, my car is a coupe.

I have a picture of the 1968 RS bottle location on my website. the link is in my signature below.

I know for sure that it goes on the inner fender on the drivers side. I have the original assembly manual for the car but it says that there is dimples on the inner fender where it goes. My problem is that I had to buy and install new inner fenders on the car and the new ones don't have dimples. Just hoping someone has measurements for the bracket. I have a rough idea but nothing exact. One more thing, on a ss, z28, or plain coupe, it is on the radiator support. On a rs, it is on the inner fender due to the headlight vacuum actuators and reservoirs. Daverichard, Very nice car! If I buy you a beer can you shoot me some measurements??? Thanks again for the help!

KCS, you've got mail....

daverichard, Thanks a ton!!! Budwieser or Michelob? Hope you have a great Holiday!!!