does any one or company have a bracket that bolts or welds on the the 10 bolt to convert to disk brakes. i have done this on dana 60s and 14 bolts, just thaught some one might know of a company that makes this or might have a pattern to make this a easy swap. thanks sparky

The axle bearing flange bolt pattern is the same for the 10, 12 and (I think), 8.5"er..

Please correct me if I'm wrong here guys??

pdq67

PDQ, I understand it the same way too. I do know from other posts that you need two right hand brakets for them to work or they'll hit the shocks. You can rob the brakes from a gen4 Camaro/Firebird and get the two brakets and bolt them up. I also heard of e-brake cable issues.


Do a search in brakes & suspension for help/answers.

what i looking for is where to get the bracket so i can go from there on fabbing up what i need to make it work. thanks for the replies

Salvage yard or dealer are two places I can think of. You'll need two rights. Gen4 (99-02) Camaro.

thanks for the reply i will try and call a dealer and find out, thanks again

Get cat's from both these places before you spring for parts...

Engineered Components Inc. www.ecihotrodbrakes.com (http://www.ecihotrodbrakes.com)

and

The Streetrod Manufacturing Co. Inc. www.tsmmfg.com (http://www.tsmmfg.com)


They might have just what you need? And I figure the price's should be very fair, imho

pdq67