WELL I AM BACK TO TELL YOU ALL THAT I INSTALED THE UPPER CONTROL ARMS POWDER COATED AND ALL . ALL NEW BUSHINGS TO BALL JOINTS .
SENT THE LOWER CONTROL ARMS TO GET THE BALL JOINTS AND BUHINGS PRESED IN BY CONCORD SAFTY CENTER . WHEN I GET THEM BACK I WILL INSTALL , THEN ORDER A 2 INCH DROP COIL SPRING FROM HOTCHKIS PERFORMANCE ALONG WITH A 1 AND 1/8th INCH FRONT SWAY BAR .
UNTILL THATS DONE I WILL TACKEL THE INER AND OUTER TIEROD ENDS .ANY THOUGHTS WOULD BE APRECIATED THANKS JAKER110

please turn off your caps button, it's considered shouting in a forum. thanks!!


be sure to thread your sway bar thru the frame before attaching your ball joints and springs. you WILL thank me later for this. :D

Thanks For The Info . Just Instaled The Lower Control Arm With Ball Joint , But Have Yet To Install Coil Spring ,

I Will Install A Hotchkis 1 1/8 Inch Sway Bar Before Joining The Upper And Lower Control Arms To The Spindle

Thanks Again For The Tip Jaker110