Hey folks, i just rebuilt the front end of my 68 with manual steering. i measured all the pieces coming in and out, and tried to get them as close as possible... but she pulls a bit to the right when i'm driving.

i tried to take it to an alignment shop and they said i'd need to bring the specs in... any one know where i can get them?

They should have them in their machine. Might want to take it to a dealer, should cost about the same.

If you want the specs. Check out Pozzi's website.

Stock factory alignment specs:
Caster +1/2 deg
Camber + 1/4 to 1/2 deg
Toe-in 1/8" to 1/4" (Radial tires need less toe-in, use 1/8" or less for them)

Find a different shop. They should have access to that info if they are any good.

Global West also has suggested specs for different useages on their site.

What suspension and rim/tire package does the car have, and what is your driving style?