OK, The install on the 327 is done. Im trying to start it up, but I get no spark. Well, i take that back...I got spark once when I turned the key off! The dist. is a Mallory, and it has 2 wires coming out of it. One red, and one Black. I assume these go to the pos and neg sides of the coil. I have the wire from the starter hooked to the pos side of the coil, and still no spark. Ive posted some pictures of the setup on my car on my signature link. The album it titled HELP! Ive also replaced the coil figureing that was bad. Still nothing. oh yeah..I do have 12vlts to the coil with the key on. Anyone..please..I have no idea what to do now.
Thanks, James

I just wonder if you got the wrong side of the starter for dist power? You might need to check that you are coming off the solenoid. check the factory routing on this ,,, Got Resistor?

I lost the direcitons to my Mallory distrubtor and I called them. The compay was very helpful and sent me a wiring diagram. My car is in the paint shop so I do not have it to look at.