Hi Guys,

I am about to replace my holey blue pump for a real pump, what do you guys recomend for my application, what is the best electric pump for street use.

Luc.

I hear Aeromotive A1000 is a good one.
Also my Product Engineering 310 has been good, but I havent had it very long.

You might want to look into the BG Enduro pumps, they are made for continuos use and do not need a return line. I bought one for my project but, have yet to hook it up. I have heard good things about them. They also have a built in filter and a dry break so you can clean the filter without spilling gas and you do not need to run an external filter.

Product Engineering makes nice stuff, I really like thier regulators.

You may want to go to www.summitracing.com (http://www.summitracing.com) and look at the clearance section. They have the BG HR220 pump on clearance it comes with the pump and regulator. I ran this pump on my last car and it never gave me a problem. It does require a return line and the regulator it the bypass type. I installed this pump in place of the Holley black I had in the car, I did not have to re-plumb anything (I already was running a bypass).

Aeromotive by far. Yes, you'll need to run a return line depending on the regulator setup you choose. Rated up to 1100 HP, which should be plenty. I used this setup on my blown 850 horse rat. It provided plenty of fuel, and was the absolute quietest pump I've ever used. Good stuff. Buy it.

Thanks again guys for the advise, I just buy the areomotive one.

What regulator should I use? I do not want to put a return line.