Where does the 1968 SS grille emlem (standard, not RS) get mounted? There are 10 horizontal slats which leaves 11 openings to put the studs on the emblem through. I would think that the emblem posts would go through the middle opening. However the posts on the emblem (it is a GM part) are not centered so putting the emblem in the center opening puts the emblem noticably closer to the bottom of the grille than the top of the grille. Is this the opening to put the posts through or should it be one opening higher? I hope I have explained myself here. I looked in the assembly manual but I couldn't find the answer, but then I can't ever seem to find anything in there when I need it. Thanks for the help