I a m installing the Stealth Ram Intake and Trick Flow heads. Can anyone give any tips that might help with the install and or programing. It looks easy enough to install. Going to have the return tube installed to the pick up/level plate. Steel line from the tank. and so on.
Any help or thoughts would be great.
thanks.

Everything you ever wanted to know about Holley EFI systems can be found here: http://www.chevytalk.org/threads/postlist.php?Cat=&Board=UBB12


The moderator, Doug F, is an engineer at Holley.

Or here at www.thirdgen.org There are a bunch of guys running this and the mini-ram from slp.

Best advice I can give you is read the manual, ask questions on Chevy Talk and then find a dealer-installer with a dyno and book some dyno time and have them simulate all types of driving and help you with the programming. I spent 3 months adjusting tweaking etc and asking questions. Then I wanted to really power tune and found a dyno shop that dealt with the 950 systems and was it worth it and I learned alot money well spent. If I had it all to do over I would install it, base map it, get it close and then dyno her. Also a wide band will help alot.

Can you give me a spot to run the harness through the dash and where to locate the controller? Thanks for the other web sites they are full of info. Will check back latter. Thanks Matt.