Can someone direct me to a site which can help me figure out the make and model of my 12-bolt rear-end. It is in a 67 Camaro RS. I know it is a 3.73 posi, but nothing aside from that.

It has an id stamped on it CF 10168 or CF 1016R.
The last digit is a bit obscurred.

Many Thanks!

CF 1016R, the R is probably a G

Is it the original rear?? Does it have the traction bar attached to it??
67 Camaro rear end codes started with P and Q. Is there a chance it's QF?

If it is CF, that's a Chevelle code for 3:31 posi

CF =
1016 = October 16th
G = Detroit Gear and Axle

I didn't think the 67's came with 12-bolt rear-ends. Especially just an RS. I would be surprised if it was original to be honest.

It does have traction bars.

The CF 1016G makes sense. Is there a site out there that documents this data?

Is there any way to tell what year it is out of?

Best Regards,
Paul

Check out http://www.camaros.org. It is THE authorative site on first gen Camaros. Some 67 Camaros did come with 12 bolt rear ends. Mostly SS models, and rarely others, like some L30/M20 models.

Here is a pic of the factory traction bar Jonesy was refering to:

http://home.comcast.net/~clwilcox33/traction_bar.jpg

Could also have been a square bar, and is also refered to as a radius rod.

My 67 z/28 has a 12 bolt rear. 67's came with 12 bolts. Whats the info on the cowl tag?

Here is the VIN: 124677N245855

And the Cowl info:
General Motors Corporation
ST O6E G
TR 67-12467 NOR146164 Body
709-Z G-1 Paint
D 3SL
Body by Fisher