Does anyone know the correct location for the rear antenna option for a 67 camaro? The car I have originally had the rear antenna option. When I cut the rear quarter panels off, I saved that peice. But, I can't find the peice now.

You can buy a template for the antenna hole. But....I don't remember where I had bought it from.

I'll meassure mine, but not sure if mine was stock placement or not ( the car had been hot rodded a few time before I got it).

I measured mine and came up with 14 1/2 from the rear of the quarter and 1 5/8 from the trunk side lip. This was an eyeball as far as center as the antenna is installed.

Now for the bad news. The quarter panel has been replaced at least the skin so I can't guarantee that these are correct. Best wait for another measurement to confirm.

http://www.camaros.net/forums/showthread.php?t=59416&highlight=rear+antenna+location

Well mine was about the same, looked like 1 1/2" from trunk line to edge of hole and from rear of quarter 14 1/2. And it was 1 and 1/4 in diameter. http://home.earthlink.net/~jon4now/sitebuildercontent/sitebuilderpictures/campicsii019.jpg

In the spirit of helping others that exists here at TC, you can use my original sheetmetal cutout that I saved from my 67, if you wish. Drop me an e-mail, I only ask that you return it when done. The hole size is 1.12 according to asm manual and measurement from firewall is indeed close to what others have posted here. Thanks for your earlier post Mark.

67 RSS, Hi, I was wondering if you got the message I sent you about the rear antenna?