A while back someone posted a picture of a custome convertible X brace that they had made that fit between the floor and the exhast. I would like to see that picture again, and if possible the dimesnsions.

Thanks

Bob

I don't if the one you saw was mine , but have a look at the one I did . I made it so it has a driveshaft loop for floor safety .
Mark .

Mine is only slightly cruder than Mark's. I only used the front 2 pairs of bolts. You can see how I made it in the pics - sorry, no dimensions - but pretty easy to do. Just use your stock X-brace for a template.

http://img.photobucket.com/albums/v61/gort69/69%20Camaro/DSCN2227.jpg

http://img.photobucket.com/albums/v61/gort69/69%20Camaro/DSCN2230.jpg

These guys also did it - you have to look around a bit to find the picture.

http://brphotrods.com/1969_NOV8TR_update/69camarocap24.html

BPOS,

Thats the one I was looking for....do you have a picture of it installed in the car?

Thanks

Bob

I have this picture, but it's not very good.

http://img.photobucket.com/albums/v61/gort69/DSCN2236.jpg

If you open the link I gave you above, scroll down to the 7th and 8th pictures from the top. Really exactly what mine looks like from underneath. All that shows are the sides of the angle iron with the bolts in them.