I've got a lunati cam that I had in my 350 about 10 years ago. I've since lost the specs on the cam and would like to know what I have. It has the numbers "114" and "11" stamped in separate locations on the front of the cam.
Any help is surely appreciated! Thanks in advance!

this is what i found.

Cam Number 30114 H235-245 110 lobe seperation 106 int. center line .507 int. .534 ex.

I ,am not saying this is what you have but it is the best i could find.

Is there a prt number engraved or stamped on the backside of the cam, on the back of the last bearing journal on the distributor gear end?

If you want to send it to me, I have a cam doctor, I can tell you exactly what you have. PM me for details.

I cannot find any other numbers engraved or stamped on this cam. I know this cam is at least 15 yrs old and I believe it's more on the mild street performance end of the spectrum. After looking at the Lunati website, I was wondering if it could be Bracketmaster II part#00011. It has an LSA of 114 degrees and with "11" being the part# it sort of matches the numbers stamped on the cam. I don't know how long these bracketmaster II series cams have been around though? I will try and call Lunati tech support tomorrow and see what they say. Thanks for all the replies and help!