What has to be done to make this work? Anyone have some good info?

Do a search on this there was a discussion about 2-3 weeks ago on this very topic.

I just searched through about 5 pages, did'nt come up with much on the rear seat. All I really got was that it dosent really work, but the fronts do.

I looking into this a few months ago. You'll find some information on it at www.pro-touring.com (http://www.pro-touring.com). do a few searches over there. You will have to do some fabrication if you go that route from would I could tell.

I looking into this a few months ago. You'll find some information on it at www.pro-touring.com (http://www.pro-touring.com). do a few searches over there. You will have to do some fabrication if you go that route from what I could tell.

I just searched through about 5 pages, didn't come up with much on the rear seat. All I really got was that it doesn't really work, but the fronts do.
Sorry I thought they talked about all the fabrication that would be required to make it work. I've seen it done once but the guy that had the car said it was allot of work. It kind of looked out of place too. The fronts look and feel great. I just don't like the backs. Good Luck

Appreciate the advise, Im actually asking b/c my friend is finishing up his 69 convertable and both of us were wanting to do this to our 69's. Im a long way away from interior though.

I recently did this. The tracks will have to be modified a good bit, most on the rear.

could you post some pictures of what you did to make it work. i was going to run 93+ rear seat setup but i havent been able to get my donor seats out yet."time issue" inorder to do a test fit. :thumbsup: that way if i run into a problem atleast i would know then with the cheap seats.:D