Hola all,

Ok.. ZZ4 (with Holley 750) in a 68 with stock hood. Whats the tallest air cleaner I can use without hitting the hood? Any reccommendations?

Thanks

Get a can of Play-Doh and make some 4 inch high columns on the carb and close the hood.

Open hood and measure the height of the columns. If crushed, subtract 1/2 inch for clearance and buy the filter of the difference in height.

I would estimate a 3 inch height filter might work. Get a cleaner with the carb air horn base is flush with the bottom of the element.

will do... thanks