I need assistance here. Those of you whom have done the Auto to Tremec comversion, I could use the driveshaft length when using a stock sub-frame and 1350 u-joints on both ends of the driveshaft

I'm preparing to sell one of my 69 Camaro's that I converted to a Tremec. It has a Martz front-sub on it and the motor may sit a 3/8" or less closer to the front.

The car I'm thinking about converting to a std trans has a stock sub-frame. I already have a Denny's Alumin. driveshaft for the car I'm selling, but since I removed the engine and trans from it, I hoped to use it for the conversion. If not, It goes with the car.....

Any help would be much appreciated.

Thx

Larry