Would anyone know what the part numbers are for the GM automatic floor mount shifter linkage and the GM shifter select that attaches to the transmission? The transmission is a TH350 turbo. Any and all help would be greatly appericated.

Thanks
Doug

If this is the one that has the rod linkage and not the cable then the part number for the rod linkage is as follows: lever that attaches to the tranny is 3904028 the swivel is 3843142 the rod is 3912613 control lever bracket asm 3912607 I hope this helps

Thank you for the information, it is a great help with our project.

Doug

Be careful. I don't have my P&A here to check the numbers above, but there is a rod and swivel that works for Glide, and a different rod and swivel that works for TH400. Far as I know, the TH400 linkage will work a TH350, but the Glide linkage will not.

If you go to Rick's online catalog, the PN for TH400 rod and swivel is RC-131 or RC-130 (former listed as "floorshift", latter listed as "column to floor conversion"). You'd have to find out what is different between the two.

The repro TH350/400 selector lever (at the trans) is RC-191.

Unless you have a 67 TH400 shifter (PRN321), you may have to get the detent plate here http://www.shiftworks.com/camaro.htm#67camaro