Yes, my 68 camaro came with the interior disassembled and I need to know what holds the door window regulator guide in place. What fasterners are used? I need to knoe the bolts nuts and I think on a similar 68 I even saw a bracket of some sort on the door holding it in place. I need to know the top and the bottom hardware names and if possible some part numbers and where to get them I looked in a lot of catalogs and I'm unable to find them.

Thank you, Ian W.

my home page: http://www.oro.net/~ianwill/

------------------

Sounds like what you need is an assembly manual for a 68 Camaro. I also got my 70&1/2 RS in pieces, So I know what you are dealing with. I will be getting an assembly manual when I start putting things back together. Got a PST front end kit going in this weekend, then it's like building a puzzle after that.

[This message has been edited by Scooter (edited 12-03-98).]

I have one of those but I didn't find the brackets or the fasteners listed there. Also I need to know where exactly to obtain these from because I need then to roll up the window with out it getting off track and fit right or do I need to go find a donor car?

Thank you,
Ian Williams

------------------

TO THEQ

HEY IF YOU STILL NEED A RESPONSE TO THIS LET ME KNOW. I JUST PUT MY68 RS/SS WINDOWS BACK IN AFTER BEING REMOVED FIVE YEARS AGO BY MY BODYMAN. YIKES!!!!!!
MY DOOR PANELS ARE OFF SO I CAN GIVE YOU ANY INFO THAT YOU WANT

Yes, I still need to know where to obtain the attaching hardware both the upper and lower for the rear window door guide. Just that if any parts supplier has them or do I need to find a donor car?

------------------
1968 Chevrolet Camaro RS/SS 350, see it at my web page at: www.oro.net/~ianwill/