You must order some of this stuff if you have some small holes to fill. I used this to fill trim holes and it is unbeliveable. It dries hard in about 24 hours. You can fill holes flush and not have to weld them. I have (had) a 1 inch round rust hole in my core support on the top. I put masking tape under the hole and filled it with POR patch and let it dry for 3 days. It ressesed down in the hole a little so I put more on to smooth it out. 2 Days later I removed the tape. I filed and smoothed it out, sanded it a little put on a light skim coat of body filler then painted it. You can't even tell the hole was there!!!! Yes welding would have been faster but I can't weld and I don't own a welder. I have found many other uses for it. This is great stuff!!

Joe

I used it for seam sealer. I agree that it's good stuff.

------------------
Rick Dorion
69 RS Conv,355,Autogear M22,4.10's and I don't worry about stone chips ( yet ).

Looks like I just might add that to my next order.
Thanks

Only 10 bucks for the tube. I would have spent 3 times that paying some one to weld up what I have fixed with it. Hood pin ancore holes in your core support are a thing of the past and easy to fix with this stuff !!!!

Joe