I need a new booster
im not doing a reso, at all, much of the car is not stock
so the booster does not need to be the factory one

I am looking for something better and smaller

what i have come up with is using an 80-81 turbo trans am 4 wheel disc brake booster, is should be a dual diaphragm booster like 8" or 9"

u guys have any other suggestions, or will this booster work?

Thanks
Jon

Billet has some nice aluminum Master cylinders with a 7'' and 9'' Chrome booster. A bit pricey though.

well i just bought a master cylinder about a month ago, so im just looking for a booster, and im on a bugdet (college student), and dont really like chrome

so thanks Dave but im still looking

You can pretty easily swap to a 3rd gen. Camaro booster if you have access to a welder. You MUST have your original booster as you will need the mounting bracket off of the back of it. Simply swap your old bracket off the old booster onto the back of the 3rd gen. booster and you will be set. They are dual-diaphragm, and are smaller in diamter. I believe them to be 10", but have not measured mine to see.

I need a new booster
im not doing a reso, at all, much of the car is not stock
so the booster does not need to be the factory one

I am looking for something better and smaller

what i have come up with is using an 80-81 turbo trans am 4 wheel disc brake booster, is should be a dual diaphragm booster like 8" or 9"

u guys have any other suggestions, or will this booster work?

Thanks
Jon
I have a brand new power brake booster from the Stainless Steel Brake kit I bought that I have deiced not to use because of concerns my motor will not create enough vacuum. The kit I bought was P/N SSB-A123-1 (medium size plated booster). I will make you a good deal if interested. It is still in the box never installed. E-mail randy.goodwin@scotts.com

You can pretty easily swap to a 3rd gen. Camaro booster if you have access to a welder. You MUST have your original booster as you will need the mounting bracket off of the back of it. Simply swap your old bracket off the old booster onto the back of the 3rd gen. booster and you will be set. They are dual-diaphragm, and are smaller in diamter. I believe them to be 10", but have not measured mine to see.


Could you do me a favor and measure to see what size it is?
and what year is it from?
any pics?

How about a NEW 11" booster with Delco Moraine stamping in triple Chrome? We have one left.... Buy it before I use it :):):)