Is there a template available for the installation of the rear spoiler on a 1st gen camaro.

I have a 68 Camaro and I need to drill the holes to install the spoiler. I am not sure of the proper placement of the holes. I can always take the spoiler and make a cardboard template but I am still not sure where the spoiler should be placed.

Thanks

Doug

Ricks catalog has a diagram with the dimensions.You can download it at here (http://www.rickscamaros.com/catalog/170-187.pdf)
Scroll to page 14. Where in NJ are ya?

The stud locations on the spoilers all vary from one to the next. The only sure way to get the holes in the right place is to punch the studs through a piece of cardboard and make yourself a template. This works every time!! :D

Paul D.

I'm with Paul. Take the spoiler you plan to use on the car, and make a template. Take your time. It's easier to redo a template than to redo a deck lid!!!

Paul's right. That's exactly what I did when I installed my spoiler. The hard part was drilling the first hole.