Is their a special tool to crimp the small round retainer to the door when installing a replcaement remote mirror? The replacement retainer appears like it needs to be put on from the outside of the door. It has a really small dog ear on the upper right cornor at about 1:00 o'clock. But when I crimp this dog ear back it does not hold the retainer in place tight enought. My car came with a remote mirror but all of the parts were missing. The hole in the door is about an inch in diameter with a litlle dog ear cut out at the 1:00 position. Thanks for any help.

What year? My '69 doesn't sound anything like what you are describing...

------------------
...Dennis
The Cars:
'69 RS Convertible w/SS trim (http://www.camaroslimited.com/memberscars/den.htm)
'96 Z28SS #1679 of 2410 (http://www.camaroslimited.com/graphics/memcars/96ss.jpg)
The Club:
Camaros Limited Nor-Cal (http://camaroslimited.com)

My car is a 67 RS/SS model. Thanks Mike

I thought most remote mirror controls used a very small allen headed set screw in the trimpanel.