Installation Kit Installation Kits 7/16" Wheel Installation Kit (all lugs and valve stems)

Fronts (2) 15x7 American Racing CL205 (Custom Built) 2-Piece Torq-Thrust II Backspacing:4 1/4 - Boltpattern: 5x4 3/4 Will be using a 225/60/R15 Tire

Rear (2) 15x8 American Racing CL205 (Custom Built) 2-Piece Torq-Thrust II
Backspacing:4 1/2 - Boltpattern: 5x4 3/4 Will be using a 255/60/R15 Tire

68 with 2 inch drop.

Thanks

JD

I have virtually that same set up on my 69 (but with Ralleys) and they fit perfect...however my car is not dropped and has the original Mono leafs & Coils. On my particular car it would be pretty close as to whether or not it would fit with a 2" drop suspension

Sorry I don't have a difinitive answer for you....I'm sure someone will chime that has that Identical set-up with the 2" drop.

Dan

just got my fingers greasy checking tie rod end clearance... you're cool!

Just some FYI - I went with a similar setup:
http://i40.photobucket.com/albums/e240/millerwb/GarageCar0002.jpg

15x8 with 4.75 bs in the back, 275/60/15 tires. My car is not lowered. I read on another post that you have rear discs. Mine are not the same as yours, but the clearance between the rear caliper and the inside of the wheel is microscopic. When you get them on, put up a picture!