|
: Shiftwork Conversion Kit Installation?? Dan 69 Mar 14th, 06, 05:08 PM I've recently swapped my TH350 for a 700R4. I received a conversion kit from Shiftworks (through NPD). There are no instructions. I also have two brackets I have no idea what to do with, and a detent plate I'm not sure how to install. Can anyone out there help???? Thanks HwyStarJoe Mar 14th, 06, 05:16 PM Call Shiftworks. 585-383-0574 questions@shiftworks.com Are you using the original horseshoe shifter between the seats? If you are, the detent plate replaces the detent plate installed inside the base of the shifter. There's a nut\bolt and a rivet attaching it to the base. The rivet will need to be drilled out and replaced with a nut\bolt. The brackets will mount at the shifter cable attachment on the transmission. HO69 Mar 15th, 06, 04:09 AM Check out this link, HarleyD67 has a photo of the brackets attached to the bottom of the pan. You may not have the exact bracket, mine was slightly different but it shows where it gets installed. http://www.camaros.net/forums/showthread.php?t=70430&highlight=shiftworks Dan 69 Mar 15th, 06, 10:52 AM This was extremely helpful. I think I've got it now. Thanks for the help. | ||