Can someone please help me out with pics and measurements for the washer bottle location on a 68 rs? I installed new inner fenders and there is no dimples or holes. Maybe some measurments from the radiator support to the bracket or bolt holes... And up from wheel well... Any other ideas and measurments are welcome. I'm getting close to getting this 5 year project done!!! Can't wait!!! THANKS!!!

Here's some quick #s .. hope it helps:

Third hole/dimple from radiator support is directly above shock stud protruding through the A-arm - on a plumb line I measured 5.15" with a digital caliper from the well opening lip. Same hole is 19.875" measuring from radiator/core support rearward. Using the third hole as a benchmark, each hole is 2.4" from the next & vertical measurements from well lip on all holes are as follows:

Front hole/dimple: 4.9"
Second hole/dimple: 5.05"
Third hole/dimple: 5.15"
Rear hole dimple: 5.4"

Bracket is attached via front & second hole from front.

Good luck!

http://img.photobucket.com/albums/v600/ChevyThunder/68%20RS%20SS/DSC00749.jpg
http://img.photobucket.com/albums/v600/ChevyThunder/68%20RS%20SS/DSC00748.jpg
http://img.photobucket.com/albums/v600/ChevyThunder/68%20RS%20SS/DSC00693.jpg

http://img.photobucket.com/albums/v600/ChevyThunder/68%20RS%20SS/DSC00750.jpg
http://img.photobucket.com/albums/v600/ChevyThunder/68%20RS%20SS/DSC00752.jpg

Thanks so far guys!!! Anymore info and pics are welcome. THANKS!!!

Oh, one more thing... Chevythunder, I spy a big block. What kind of jewel do you have there? I'll gladly look at more pics of your car. I'm jealous...