ok, i have my block and im starting to bolt everything back together again. i have the lifting hooks and the wire loom thingy. besides the obvious like coil holder, water neck, manual choke, vacuum t, and carb, what else gets bolted onto the intake. i have one spark plug wire separator. is there two? does the passenger side lifting hook go on the last bolt to the rear or the second one from the rear? thanks for the help. its been a while and i didnt take any pics and i forgot where they go.

angel

angel, depends on what engine, year and model you have. small blocks had 2 wire looms on either side in the rear. SS350 had a special accel return spring bracket. TH350 cars had the kickdown bracket. rear pass lift hook goes on the last one, front drivers goes on the 2nd to last.

kevin,

its an ss350 4 sp. that is what i figured and i cant find the other wire loom that goes on the pass. side. if it goes on the pass. side, is it just bolted to one bolt and the hook to the last bolt?

angel

Correct. drivers side is the big bent loom that power brake tube goes through, pass side is a straight piece.