Guys,

About to spray my car with PPG Deltron 2000 DBC -TCP2079(sc)(Fathom green) #983

What is the mixing ratio for the base coat???? Picked up all sorts of supplies but didn't realize the mix was not on the can.

Thanks very much in advance,

doug

According to the datasheet, mix DBC 1:1 with DT reducer.

http://www.ppg.com/cr-refinish/phase1/frmFindProduct.asp


For future reference. :thumbsup:

ETA: If the link takes you to the page to choose a region, click on the North American area then hit refresh then click the link again.

[shakes his head]Sometimes I don't understand the internet webby thing.[/shakes his head]

many thanks to both of you. Well, here goes nothing.........FYI, I have no fingerprints left from 3 days of sanding.

Thanks again,

Doug

hey!!! no fingerprints? now is the time to "hit up a bank" for more cash to finish your resto.....

I have no fingerprints left from 3 days of sanding.
LMAO...the rough side of the paper goes to the paint surface.

The only place I dont use a block, is scotch brighting in the jams.
90% of sanding is using flexable blocks with handles 15 and 20 inch.

LMAO...the rough side of the paper goes to the paint surface.

No wonder it took him 3 days to sand :D