does anyone have an exploded view of the correct assembly of the console gages as they are installed into the mounting plate? i am putting a console together with oer gages but do not have any assembly diagram. the location of the rectangular insulating plates are my main consern, but i have some other hardware that i dont know where it goes. the assembly manual i have is of no help. any help is appreciated.

Hi there,

I would greatly appreciate your sending me a copy of this info once you receive it from one of our tc members. Thanks, Charlie at challengermaniac

Its hard to tell what parts you have that dont seem to have a home in the cluster but the AIM is pretty good with details of the pieces. Here is the one I have from my AIM.
If you want to cruise my photos of my cluster they are in here... interior pics including console guages (http://www.brainerd.net/~knudsen/69RS/Interior/)

http://www.brainerd.net/~knudsen/69RS/Interior/conselguagecluster2.JPG

thank you for the reply. your pics help, but are there any insulating blocks(rectangular in shape,like a tiny shoe box) between the gage back and the front of the mount plate? i see in your pick that there is a pink wire and a green wire to the back of your fuel gage, is this for the low fuel light? thanks mike.

Here is wiring diagram for console WireDiag (http://www.brainerd.net/~knudsen/69RS/Interior/Consolewiring.jpg)

You can go thru my pics here and see guages installed with wires showing. interior and Console pics (http://www.brainerd.net/~knudsen/69RS/Interior/)